The FALCON GSA 250 floor grinder features an internal safety cut out system to enable engine overload protection and has a removable shroud system to allow grinding as close as possible to a wall or other floor protrusion. It also features a dust extraction port and water connection. Wheels can be extended and the handle can be folded for easy transportation. Level adjustment on rear wheels allow the user to maintain a flat surface.
This GSA 250 floor grinder is single head grinding machine, foldalebody makes it have compact size, easy to carry. Compact size increase its flexiblity on the project site. Special silencer design and reduce the noise during operation.
Basic Specification data is as below:
Power: 2.2Kw/3Hp; Rated Voltage: 230V
RPM: 1410rpm; Net Weight: 67KG
Packing Size: 825mmx432mmx860mm
QUANTITY: 144pcs./ 40container 70 pcs./ 20container
Mounting Plate: Standard 250mm Mounting plate
Bolt Types: M12x25 Contersunk socket head
1.Internal overload protection;
2.Folding handle to reduce space during transportation;
4.Handle height adjustment;
6.Dust extraction port.
- The Floor Grinder is fitted with 2.2kW single phase motor. This motor offers a direct drive to the grinding plate with the incorporation of a flexible coupling between the motor and the plate；
- The shroud system is unique in design, automatically adjusting to suit segment height and floor angle. This shroud system, when used in conjunction with an appropriate industrial vacuum unit, eliminates dust loss during grinding. The shroud has 2 removable sections to enable the operator to grind close up to the wall etc. Please note that dust loss is possible when this section is removed；
- The floor grinder comes complete with a water connection for wet grinding should this be required. This incorporates a ball valve allowing the operator to regulate the water supply to obtain the best grinding results；
- The floor grinder has a foldable handle which enables it to be easily transported in the trunk of most small vehicles. The rear wheels can also be extended outward should the operator want more stability from the grinder. This requires the use of a 10mm wrench. The operator can also raise or lower the height of the handle to maximize their comfort when using the grinder. And the new designed lifter system makes operator handy to use.