Blog

/Blog
1307, 2017

Want to use diamond saw blade longer? You have to know 5 factors!

July 13th, 2017|Categories: Blog|0 Comments

When we buy a diamond saw blade, we hope the blade can be used as long as possible, below are 5 factors affect the life of diamond saw blade. Diamond Grit Diamond Grit Size, normal [...]

306, 2017

Is diamond concentration the higher the better?

June 3rd, 2017|Categories: Blog|0 Comments

When we say a diamond saw blade is good or bad, normally we consider the cutting efficiency and life of the blade. The blade segment is composed of diamond and metal bond. As the main [...]

1504, 2017

How to define green concrete and cured concrete?

April 15th, 2017|Categories: Blog|0 Comments

he “age”, or length of curing time, greatly affects how the diamond saw blade performs on cutting concrete. Before choose the right diamond blades, it is important to know something about the curing of concrete. [...]

903, 2017

How to classify the concrete hardness

March 9th, 2017|Categories: Blog|0 Comments

How to classify concrete hardness? Before choosing the diamond tools, it is essential to know the hardness of concrete The hardness of concrete is referenced by its compressive strength measured in Pounds per Square Inch [...]

2001, 2017

What is the difference between the silencer blade and low noise blade?

January 20th, 2017|Categories: Blog|0 Comments

 What is the difference between the silencer blade and low noise blade?   Noise will be a problem if the cutting job is carried out inside the residential area. There is higher percentage you will [...]

701, 2017

Is Arix Diamond Blade Cutting Faster than Normal Diamond Saw Blade?

January 7th, 2017|Categories: Blog|Tags: |0 Comments

Is Arix diamond blade cutting faster than the normal diamond saw blade? Most of people would say “yes”. However, this reply is not 100% correct. Sometimes the Arix diamond blade may cut slower than the [...]